Sometimes I'll find a holder that clearly doesn't pass my inspection and set it aside. I can't throw them away, so here they are! A lot of the "damages" are very hard to see, especially with a photocard in. Since every situation is different, prices will vary.
The outer dimensions of the holder are 70mm x 105mm and the inner (pc insert space) measurement is 62mm x 95mm. The photocard that is shown in the first picture has a little wiggle room inside, so I highly recommend using a penny sleeve (even doubling up) to protect the photocard! The colors are not a 100% match to the photo, the holder being slightly more vibrant in real life!
The photocard holder will be shipped in a cardboard box and has protective plastic covering both sides of the acrylic. It's up to you whether you would like to remove both layers of the plastic protection film, but please be careful if you do decide to remove the thinnest layer to avoid any scratching that may come up! I recommend going from the corners with something small/light like a needle. In the case of plastic-surface scratches, the plastic may be pre-removed in advance, in which case the holder will be wrapped in protective tissue paper.